KRONCE, the producer of injection molding machine specialized in the injection molding of PET products, on showed turn-key solution of PET box injection molding.

Starting from one/two cavities manual operation PET blowing system, Kronce Enterprice Development Co., Ltd. focus on the design & manufacturer of high speed PET preform injection molding system, high speed linear PET bottle blow molding system and high quality PET preform mold to provide clients with the turn-key solution of PET preform injection molding. The high lights of KRONCE PET Preform Injection Molding System include：

• K-PET24-90A: which include 24 cavities PET preform injection mold, PET preform take-out robot with 72pcs of post cooling tubes for the production of PET preforms from 67g to 90g for water bottle of 3-5L with 48/41 bottle necks in an injection cycle time of 24s and output capacity up to 3600pcs/hour.
• K-PET24-90B which include 24 cavities of PET preform mold, PET preform take-out robot with 72 pcs of post cooling tubes for the production of PET preform from 90g to 120g for 5L oil bottle with 45mm press type neck in 28 seconds injection cycle time with an output of 3085pcs/hour.
• K-PET48A(35) which include 48 cavities PET preform injection mold, PET preform take-out robot with 144pcs of post cooling tubes for the production of standard PET preform <35g for the pure water bottle up to 1500ml at a cycle time of 7.5s and an output capacity up to 23000pcs/hour.
• K-PET48B(46) which include 48 cavities PET preform injection mold, PET preform take-out robot with 144pcs of post cooling tubes for the production of standard PET preform <46g for the carbonated dring or pure water bottle up to 1500ml at a cycle time <7.5s and an output up to 23000pcs/hour.
• K-PET48A(35) which is an enhanced model basedon K-PET48A(35) to have a 72 cavities of PET preform injectio mold, PET preform take-out robot with 216pcs of post cooling tubes for the production of standard PET preform <35g for pure water bottle up to 1500ml at a cycle time of 7.5s and an output up to 34000pcs/hour.

Other than solutions of PET preform injection molding, the products of KRONCE include the injection molding machine for PET products, high speed blow molding sytem of PET bottle, the standard blow molding system, cap compression system and PET preform injection mold to provide clients with a turn-key solutions of PET bottle.