Injection Molding Machine for 6 Cavities Yogurt Cups IML Production -- ONGO N290 High Speed Injection Molding Machine

The N290JD is a high speed injection molding machine for thin-wall containers manufactured by Ningbo Ongo Precision Machinery Co., ltd. with clamping force 2900kN and an injection rate up to 566g/s. The space between the tie-bars of ONGO N290JD is 580 x 580mm and is suitable for the production of snack box up to 1250 x 1750mm with a 2 cavities mould layout design.

Designed for the thin-wall containers, the ONGO N290 high speed injection moldign machine has below features for the fast injection molding of the IML Yogurt cups:

• Special injection piston rod design with a better force balance, will prolong the life of the oil seal and reduce the resistance and the amount of oil returned during high speed injection.
• Parallel movement and high-speed/low pressure injection movement will reduce the cycle time for thin-wall containers injection molding.
• The linear guide will help to reduce the friction of the injection unit during high speed movement and reduce the injection cycle time.

The Platen Size of ONGO N290JD High Speed Injection Molding Machine

SWITEK 6 Cavities Yogurt Cups Side Entry IML Solution

The IML solution on show is a 6 cavities 100g round Yogurt cups IML production by SWITEK high speed side entry IML robot SW833 at the cycle time of 6.5s. Which is one of the most popular design of the cups for Yogurt. And the IML robot SW833 is a modular designed unversal IML robot for the fast IML production of small and medium sized thin-wall containers for injection molding machine with calmping force 1500kN ~ 5000kN.

To have the ONGO N290JD high speed injection molding machine for the 6 cavities 100g Yogurt cups side entry IML production will make no wast the injection capacity of the injection molding machine.